Menu
Start freeFloor plansRoom photosPricingSign in
EN
Start free

Guide

How to read a floor plan.

A floor plan is a view from above, cut about one metre above the floor. Thick lines are walls, arcs are door swings, thin lines in a wall are windows, and the numbers are sizes. Here is how to read each part.

Try it free

Walls

Walls are the thick or filled lines. Outer walls are usually thicker than inner walls.

Doors

A door is a gap in the wall with an arc. The arc shows which way it opens and how much floor it needs.

Windows

A window is drawn as thin parallel lines inside the wall.

Dimensions and scale

Dimension lines have a number between two ticks. In metric plans the number is often in millimetres, so 3400 means 3.4 m. A scale of 1:50 means 1 cm on paper is 50 cm in real life.

Furniture and symbols

Furniture is drawn as simple outlines to scale. Electrical plans add symbols for sockets, switches and lights. In Roommie you can hover a symbol to see what it means.

Start with the big picture

Before you look at any detail, find the front door and follow the path you would walk through the home. Then look for the north arrow, the scale and the room names. In a few seconds you know how the home connects and which rooms get the sun.

Line types

The weight of a line tells you what it is. Most plans use the same logic.

  • Thick or filled lines: walls that were cut through.
  • Medium lines: things below the cut, like stairs, counters and fixtures.
  • Thin lines: dimensions, floor patterns and notes.
  • Dashed lines: things above the cut or hidden, like upper cabinets, beams or a roof edge.

Stairs and level changes

Stairs appear as a row of parallel lines with an arrow. The arrow points up, and a note often says UP or DN. A zigzag line across the stairs marks where the drawing was cut, because the upper part belongs to the next floor plan.

Kitchens and bathrooms

Fixtures are simple shapes. A rectangle with a circle or oval inside is a basin. A longer rectangle is a bath. A square with an X or corner lines is often a shower. A kitchen sink is a rectangle in the counter, and four small circles mark a hob.

Common abbreviations

Plans save space with short labels. They vary by country, so check the legend first.

  • WC: toilet.
  • DW: dishwasher.
  • W/D: washer and dryer.
  • REF: fridge.
  • CL or WIC: closet or walk-in closet.
  • FFL: finished floor level.
  • CH: ceiling height.

Read the size of a room

Add the dimension lines along each wall, or read the label in the room. Check whether the number is inside the walls or to the middle of the wall, as that can change the size by 10 to 30 cm. To get the floor area, multiply length by width: 4 m by 3.5 m is 14 m².

Check the plan against real life

Imagine carrying a sofa from the door to the living room. Stand in each doorway and see what you would see. Check that doors do not hit each other, that the bed has a walkway on both sides, and that the kitchen has counter space on each side of the hob. Our guide to furniture clearance gives you the numbers.

Questions

Which way is north on a floor plan?

Look for a north arrow. If there is none, north is often at the top, but do not rely on it.

What does 1:100 mean?

One unit on the drawing is 100 units in real life. 1 cm on paper is 1 m.

Updated 30 October 2026. Floor plans are design drafts, not construction documents.

Start with
one sentence

Open the studio